A) Which product is the correct Electrical Insulating Rubber Matting for protection against electric shock risk ? B) Choose the correct class based on your overall voltage requirements. C) BS EN 61111:2009 ( IEC 61111:2009 ) is the latest standard for electrical insulating rubber matting in providing electrical protection by classes defined.
A) Product Name Model : GS-SL Corrugated Switchboard Matting / Non Conductive Switchboard Mat / Dielectric / High Voltage Insulation Rubber Mat
B) Raw Material : NATURAL RUBBER ( NR ) BASE POLYMER ( Karet Alam )
C) Purpose Switchboard matting is a non-conductive high density rubber compound engineered to prevent electric shock around high voltage equipment. The non-conductive rubber compound creates an insulating barrier between the electrical source and ground.
D) Scope Our GS-SL is under IEC 61111:2009 Class 1 , Ideal for Dielectric Voltage / Withstand Voltage : 20,000 VAC and Recommended Maximum use Voltage : 7,500 VAC ( High Voltage Switchboard Matting )
E) Characteristics 1) Brand : GSE Trade Mark : ( eRubber and Heat Insulation Mall ™ ) 2) Model Name : GS-SL , Switchboard Matting / High Voltage Insulation Rubber Mat 3) Top Surface - Anti Slip Corrugated , with anti slip corrugated surface to provide safe working environment , pattern surface “grabs” the bottom of footwear, improving traction and safe from slippery . 4) Colour : Black 5) Test Certificate : * provided 6) Product Compliance Status :- A) BS EN 61111 Clause 188.8.131.52 Class 1 , Voltage Withstand Test B) Comply to RoHS I & II , On 4th June 2015, Commission Directive (EU) 2015/863 was published in the Official Journal of the European Union (OJEU) to include the phthalates ( BBP, DBP, DEHP and DIBP, these are used to soften PVC and Vinyl ) into ANNEX II of the RoHS Recast Directive. The new law restricts each phthalate to no more than 0.1% ( mg/kg = ppm ; 0.1wt% = 1,000ppm ) in each homogeneous material of an electrical product. 7) Specific gravity : ± 1.50 g/cm³ 8) Hardness : 60 ± 5 Shore A 9) Elongation : Min ± 250 % 10) Tensile Strength : Min ± 5 MPa
F) Specification 1) Nominal Thickness : 3mm BS EN 61111 : 2009 Class 1 ( Withstood 20kV ) , GS-SL A) Model : GS-SL , Switchboard Matting, ( Black colour ) , 3mm Tk x 915mm ( 3ft ) Width x 10,000mm ( 10 m ) Length / roll ( Approximately > 35kgs / pc )
" Authentic Mark “ 1) Trade Mark , defined standards and colour code labelling .
Disclaimer : * Note : Users need to evaluate suitability for their industries use ( applications ) before placing order from us . The Information provided on this website best advise our customers corresponds to current electrical matting standards . In the individual case it is the sole responsibility of the customer to evaluate requirements , in particular if specified properties are sufficient for use .
OUTER CARTON LABEL INDICATION :-
Non conductive Switchboard Mat / Dielectric / High Voltage Insulation Rubber Mat :- Model : GS-SL, Top Surface : Anti Slip Corrugated , IEC 61111: 2009 Class 1 , Dielectric Test Voltage : 20kV Nominal Maximum Use Voltage : 7.5kV
Karpet Panel Listrik / Electrical Insulation Mat / Non Conductive Switchboard Mat / Dielectric / High Voltage Insulation Rubber Mat Indonesia -- with Anti Slip ( Corrugated / Diamond Plate ) Top Surface